1350 PUR Hot Glue Flat Lamination And Wrapping Machine

1350 PUR hot glue flat lamination and wrapping machine

1350PUR film application area:

Applicable substrates: various decorative panels such as wall panels, WPC boards, plastic steel boards, MDF, multi-layer boards, solid wood boards, PVC boards, and aluminum boards.

Applicable fabrics: PVC, decorative paper, wood veneer, film and other decorative fabrics

Equipment structure side view

Equipment structure top view

Features:

1.Compared to flat laminators, this machine uses 60-65 grams of glue per square meter, while the flat laminators use 100 to 120 grams of glue per square meter. Therefore, this machine has a lower production cost and is suitable for flat lamination of PVC roll film.

2.This machine is a hot glue flat laminator, which provides a stronger bond and is more environmentally friendly.

1350 PUR Technical Specifications:

Equipment Function Description:

1. Width of wrapping: 600mm - 1300mm ;

2. The width of the wrapping is controlled by a linear slide rail for bidirectional adjustment;

3. Wrapping speed: 1-20 m /min; Total power: 28 kW;

4. The guide rod, short half-section, and long half-section are all chrome-plated (durable and highly corrosion-resistant) ;

5. The entire machine is intelligently controlled via a 10-inch high-definition touchscreen, which controls the amount of adhesive, temperature, speed, and hot air gun.

6. The scraper blade is made of imported German high-temperature durable and wear-resistant mold carbon steel . The left and right drive is a linear bearing , which can be adjusted by hand (others use a sleeve, which is easy to wear and difficult to adjust).

7. The tool holder assembly is precision machined using a grinding machine;

8. The 55-gallon glue press uses a pneumatic system from the renowned Taiwanese brand Airtac ;

9. The main control electrical appliances are all from Delixi and other well-known Chinese brands ;

10. The main drive motor uses a brand-name motor with an all-aluminum shell and a pure copper core ;

11. Electrostatic protective film device;

12. The transmission system adopts a high-precision, low-backlash, and durable 45° helical gear transmission box ;

13. Durable all-copper Kyushu motor with adjustable speed dust sweeping and blowing device;

14. Infrared high-power substrate heating device ( temperature can be adjusted as needed );

15. The entire pressing and transmission system adopts a roller and long-shaft wheel structure;

16. Main bonding roller: The upper bonding roller is made of wear-resistant, high-temperature resistant, and corrosion-resistant imported resin silicone roller with a hardness of 60°±5°, and is manufactured through dynamic balance adjustment process ;

17 . Each of the front and rear (powered) high-efficiency and precise feeding and receiving platforms is 2.1 m × 1.2 m .