ANDA's Online PVC Corner Profile Hot Stamping & Lamination Machine is designed for decorative surface finishing of PVC corner clips, ceiling trims, and wall panel profiles. It supports hot stamping and lamination processes to apply colorful decorative films, wood-grain patterns, and other surface finishes, helping corner profiles match PVC ceiling and wall panels. With adjustable temperature and speed control, the machine accommodates compatible profiles of different shapes and dimensions, providing a flexible and efficient solution for decorative PVC profile production.
The machine is designed for online decorative finishing of PVC corner profiles.
Its operating speed can be adjusted to match the extrusion line, allowing surface decoration to be coordinated with profile production.
The specific installation and synchronization requirements depend on the customer's extrusion line configuration.
The machine applies suitable hot stamping foils to PVC profile surfaces.
Manufacturers can select compatible decorative patterns, including wood-grain effects and solid colors, to coordinate corner profiles with PVC ceiling and wall panel products.
The machine uses an intelligent temperature controller to adjust processing conditions.
Suitable temperature settings help achieve consistent decorative foil transfer according to the selected foil and PVC profile material.
Variable-frequency control allows operators to adjust the machine's operating speed.
This supports coordination with different PVC profile extrusion speeds and decorative foil requirements.
With published dimensions of 2000 × 700 × 1600 mm, the machine has a relatively compact structure.
The rated total power is 2 kW, making it suitable for integration into appropriately configured PVC profile production lines.
The machine is intended for PVC corner clips and decorative profiles.
Different profile shapes may require corresponding hot stamping contact arrangements. Customers can provide profile drawings for configuration confirmation.
Apply decorative finishes to PVC corner clips used in ceiling panel installations.
Suitable foil patterns help coordinate the appearance of corner accessories with PVC ceiling panels.
Decorate PVC corner profiles used with wall panel systems.
Different compatible foil colors and patterns can support coordinated interior decoration.
Apply surface finishes to compatible PVC trims used for panel edges, corners, and interior decorative details.
Produce decorative surface finishes for compatible accessories used in PVC ceiling and wall panel installations.
Parameter | Specification |
|---|---|
Machine Type | Online PVC Profile Hot Stamping Machine |
Maximum Working Width | 300 mm |
Workpiece Thickness | 0–20 mm |
Working Speed | Matched to Extrusion Line Speed |
Total Power | 2 kW |
Machine Weight | 800 kg |
Machine Dimensions (L × W × H) | 2000 × 700 × 1600 mm |
Speed Control | Variable-Frequency Control |
Temperature Control | Intelligent Temperature Controller |
Main Application | PVC Corner Clips and Decorative Profiles |
Specifications are based on ANDA's published product information. Final processing requirements and machine configuration should be confirmed before ordering.
It is a decorative surface-finishing machine that applies hot stamping foils to compatible PVC corner profiles and trims. It is designed to operate in coordination with a PVC profile extrusion line.
The machine's published working speed is specified as matching extrusion speed. Installation compatibility and synchronization requirements should be confirmed according to the existing production line.
The machine is primarily intended for PVC corner clips and decorative profiles used with ceiling and wall panel systems. Other profile shapes require compatibility confirmation.
The maximum published working width is 300 mm.
The published total rated power is 2 kW. Actual operating energy consumption depends on production conditions.
Compatible wood-grain hot stamping foils may be used to create decorative wood-grain effects. The final result depends on foil selection and process compatibility.
Yes. The machine uses variable-frequency speed control to support speed adjustment according to the extrusion line.
No. Hot stamping transfers a decorative layer from foil using heat and pressure, while PUR profile wrapping uses PUR hot melt adhesive to bond a decorative film or veneer to the profile.
Customers can provide profile drawings, dimensions, and stamping requirements so ANDA can evaluate suitable contact arrangements and machine configurations.