WPC Door Frame Production Line

Product Details

1. WPC Door Frame profile Production Line--extruder

Extruder adopts WPC Door Frame dedicated screw, make sure best plastisizing effect
Extruder speed and haul off speed controlled by ABB frequency converter, saving power and easy adjusting speed
Extruder temperature adopt PID control, temperature fluctuation self adjusting, it realize the high automatic level

2.WPC Door Frame profile Production Line—Cooling Table

Use vacuum system which could better achieve cooling accomplished results.

3. WPC Door Frame profile Production Line——Hauling Machine &Cutting Machine

Hauling Machine adopt alloy rubber blocks, strictly keep the smooth transition of profile.
Cutting Machine adopt stainless steel material which is wear-resistant and durable. It also equipped with dust cleaner device.

4.WPC Door Frame Making Machine Production LIne——Stacker

Stainless steel 304 as touching material;
Discharge driving by air cylinder.

Technical Specifications

The current ANDA product page lists these three extrusion configurations and their corresponding 24-hour capacities and motor powers.

Actual output depends on the WPC formulation, profile dimensions, die design, extrusion conditions and operating parameters.

Extrusion and Temperature Control

Dedicated WPC Extrusion Screw

The extrusion system uses a WPC-specific screw design to support material plasticization and continuous profile extrusion.

This configuration is intended for WPC compounds containing plastic resin and wood-based fillers.

Variable-Speed Control

The extrusion and haul-off speeds can be controlled by frequency converters.

Synchronized speed control allows operators to adjust production speed according to the profile and material requirements.

PID Temperature Control

The extruder uses PID temperature control to regulate processing temperature. Automatic temperature adjustment helps maintain stable extrusion conditions.

The current ANDA page specifically lists ABB frequency converters, PID temperature control and an Omron intelligent temperature controller.

WPC Door Frame Surface Finishing

The basic extrusion line produces the WPC profile with the required cross-sectional shape. Additional equipment can be integrated when a decorative surface is required.

PVC Film Lamination

PVC film can be laminated onto the WPC profile to create different colors, patterns and decorative finishes.

Hot Stamping

Hot stamping can be used to create decorative surface patterns, including wood-grain effects and other designs.

The source product information states that WPC profiles can receive printing or lamination treatments, while the optional equipment includes profile lamination and hot stamping.

FAQ

What is a WPC Door Frame Production Line?

A WPC Door Frame Production Line is a complete extrusion system used to manufacture wood plastic composite door frames and door frame profiles. It integrates extrusion, die forming, vacuum calibration, cooling, haul-off, cutting and stacking.

What materials are used for WPC door frames?

WPC door frames can be manufactured from plastic resin, wood powder or plant fiber, calcium carbonate and suitable additives. The final formulation should be selected according to the required product properties and processing conditions.

What WPC door frame sizes can the line produce?

The final profile size depends on the die and product design. Customized dies can be used for different WPC door frame cross-sections and dimensions.

What is the production capacity?

The current ANDA specifications list capacities of approximately 2,200 kg per 24 hours for the 51/105 configuration and 3,000–3,500 kg per 24 hours for the 55/110 and 65/132 configurations.

Can the WPC door frame surface be decorated?

Yes. Optional lamination and hot stamping equipment can be added for decorative surface finishing.

Can one production line produce different WPC profiles?

Yes. Different profile dies can be used to produce different cross-sectional shapes and dimensions. The die should be selected according to the required product design.

Does the production line include automatic cutting?

Yes. The complete configuration includes a cutting machine, and an automatic stacking system can collect the finished profiles after cutting.

Can the production line use automatic feeding?

Yes. An automatic material feeding system can be integrated into the production line to support continuous material supply.

Customized WPC Door Frame Production Solutions

The production line can be configured according to the customer's required product and production conditions.

Before selecting the equipment, manufacturers should confirm:

• WPC door frame profile drawing

• Profile width and height

• Profile cross-section

• Required output

• WPC formulation

• Surface finishing requirements

• Cutting length

• Automation requirements

A customized profile die can then be selected or designed according to the required WPC door frame dimensions.